Interface Controller for FLOW^EVO and BASIC^EVO

smartGAS is offering different Interface Controller for FLOW^EVO and BASIC^EVO to support your application need

CONNECT INTERFACE
for FLOW^EVO or BASIC^EVO with ambient pressure compensation

Product features:

• Simplified in-range calibration with test gases between 50 % and 100 % of the measuring
• Zero and span adjustment possible via jumper
• Actuation of micro pumps possible (6V DC fix)
• Extension with analogue interfaces ((0)4-20mA and 0-2/5/10 V DC adjustable)
• Pressure compensation 800 - 1150 mBar ambient
• Optical display of the sensor state by LED (green, yellow, red)

CONNECT INTERFACE
for FLOW^EVO with cuvette pressure compensation

Product features:

• Simplified in-range calibration with test gases between 50 % and 100 % of the measuring
• Zero and span adjustment possible via jumper
• Actuation of micro pumps possible (6V DC fix)
• Extension with analogue interfaces ((0)4-20mA and 0-2/5/10 V DC adjustable)
• Pressure compensation 800 - 1150 mBar gas stream connectable
  
• Optical display of the sensor state by LED (green, yellow, red)

---

S-CONNECT II
the Flexible Interface for FLOW^EVO and BASIC^EVO

Product features:

• Power Supply 24VDC
• Internal power for FLOW^EVO or BASIC^EVO
• Zero and Span Calibration via jumper
• Analog Output (2)4-20mA 3kV safe
• LED Inicator
  
• Optional : RS485 Interface
• Optional : Analog Output 0.2-1VDC
  
• Optional : RTU Firmware
• Optional : Low Noise / Short T₉₀ time Firmware
  
• Optional : Customized Firmware
  

---

EVO^Plus
the fully integrated Interface for all FLOW^EVO

Product features:

• Wide range Supply Power input 10..26VDC
• FLOW^EVO powered directly by EVO^Plus Controller
• Very Low Noise <±0.075%[FS] data output at short T90 Time < 3s
• Directly connection to 12 and 24VDC passive PTC Heater
• RS232 and RS485 Interface
• Optional : High speed output rate up to 10Hz
• Optional : Analog Output (2)4-20mA Interface isolated 3KV DC
• Optional : Analog Output 0.2-1VDC Interface
• Optional : Adjustable analog output setting
• Optional : Active high accuracy adjustable Heat Control <±0.5K
• Optional : Environment or Cuvette Pressure Compensation <±2mBar | <±0.2kPa
• Optional : Customized Software Solutions