The Calibration Tool for FLOW^EVO , BASIC^EVO and CONNECT

With the smartGAS Calibration Tool, all sensors of the EVO series F3 and B3 can be read out and calibrated quickly and easily,
both individually and in combination with the optional Connect Interface electronic board.
The software offers users many practical functions:

Product features:

• Readout of sensor information and operating states
• Setting the zero point and end point
• Resetting the zero point to the factory settings
• Resetting the end point to the factory settings
• Graphical display of the gas concentration during calibration
• Measured values displayed as diagram in the final report
• Generation of data records for remote diagnostics by smartGAS
• Supporting BASIC^EVO, FLOW^EVO and CONNECT INTERFACE
• Fully wizard guided user interface
• Easy zero and span adjustment
• Read out of operating conditions
• Simple Modbus address setup
• Printable service report (as found - as left)
• Plug in smartGAS USB communication adapter

How to install and set up your Software:
1. Download the smartGAS Calibration Software and install it on your PC or Laptop

Requires:
Windows 7 or higher (x86 oder x64); PC administration rights;
1GHz dual-core Prozessor, 2GB RAM, 200MB free storage;
Microsoft .NET Framework; Communication adapter hardware

The Data Logger for FLOW^EVO , BASIC^EVO and CONNECT

The smartGAS Data Logger has been especially developed for sensors of the FLOW^EVO and BASIC^EVO series with and without Connect Interface.
It is the perfect tool for tests with the sensors during the design-in phase, for service tests and to perform measurements over long periods of time

Product features:

• Reading out the gas concentration values of the connected sensors in real time
• Graphical display of the measured values with scalable axes
• Storage of measurement results in .csv format for further processing
• Perfect for status analyses of sensors during servicing
• Suitable adapters can be ordered from smartGAS

The Data Logger can be used immediately and free of charge without a license.

No registration or product activation is required.
Download and installation smartGAS Data Logger

Here you can easily download the Data Logger

How to install and set up your Software:
1. Download the Software
2. Unpack the ZIP-file
3. Follow the installation wizard
4. The Data Logger is now directly ready for use

Requires:
Windows 7 or higher (x86 or x64); PC administration rights;
1GHz dual-core processor, 2GB RAM, 200MB free disk space;
Microsoft .NET Framework; USB communication adapter

---

Module Test Software for FLOW^EVO , BASIC^EVO and SILAREX

The Test Software has been especially developed to test FLOW^EVO and BASIC^EVO or SILAREX in Development and Service

• Reading out the gas concentration and temperature for all EVO
  
• Read out all channel, temperature and pressure values for SILAREX
  
• Ideal for long time test application in service and development
  
• Suitable adapters can be ordered from smartGAS

Requires:

---

Customized Software on Request